DigitalBlackandWhiteThePrint By Thread
- Re: Workshops BKPhoto@aol.com (02 Mar 2005)
- Re: Monitor Calibration Steve Kale (19 Mar 2005)
- QTR q's davidtrawick1 (31 Mar 2005)
- Cream based archival paper Phill Potter (31 Mar 2005)
- epson 3000 connectivity Joseph Loscalzo (31 Mar 2005)
- Newbie Resolution Question. ben_zlotkin (31 Mar 2005)
- BO with Dye ink, need advice John (31 Mar 2005)
- Contrast / brightness settings problem w Epson 2200 ap0izner (30 Mar 2005)
- Re: Really Grainy Tri X Scans Jack Winberg (30 Mar 2005)
- PremierArt Fine Art 335gsm 23mil Luster Rag Andre (30 Mar 2005)
- qtr profiles and mac users jsigmonmd24 (30 Mar 2005)
- Re: Tri-X's grainy scans Gary Barnett (30 Mar 2005)
- Dedicating a printer to Black & White paulvtt (30 Mar 2005)
- Epson guarantees print life Ken Carney (29 Mar 2005)
- What is the Epson Stylus C83 in Australia frakk24 (29 Mar 2005)
- Scanner question for Microtek 120tf users ben_zlotkin (29 Mar 2005)
- Quadtone downloaded I'm confused montauklady (29 Mar 2005)
- Epson 3000's masonf64 (29 Mar 2005)
- Epson R1800 with UC inks anyone? Mike Gerra (29 Mar 2005)
- MIS UT inks and Espon C66/C86 tmbrlinemusic (29 Mar 2005)
- Not happy with Yahoo's new look ? Andre (29 Mar 2005)
- Really Grainy Tri X scans oboylephoto (29 Mar 2005)
- downloaded quadtone..I'm confused montauklady (29 Mar 2005)
- The best education... Joe Cantrell (28 Mar 2005)
- New UTFS and UTFSN - R9 or Roark Workflow Curves? Jim Batzer (28 Mar 2005)
- Signature on Prints with MIS Ink scott_now_coming (28 Mar 2005)
- OT. Flatbed Scanner recommendations bob3c2000 (28 Mar 2005)
- Re: Refilling EZ Carts in Printer toliwel@aol.com (28 Mar 2005)
- 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Thomas Keesling (28 Mar 2005)
- Ultratone on Epson 1280: which paper and ink? mleblanc001 (28 Mar 2005)
- gaussian blur...check it out Djon (27 Mar 2005)
- Access violation when blending in OPM helen_bach2003 (27 Mar 2005)
- BO Printing with scanned negatives (newbie question) w1pa (27 Mar 2005)
- Came Back to Some Forum Changes and a New PS CS2 Tom Husband (27 Mar 2005)
- Refilling EZ Carts toliwel@aol.com (27 Mar 2005)
- QTR and Photo Rag Andy (27 Mar 2005)
- Long Footer photoian@comcast.net (27 Mar 2005)
- Paper found with surface like darkroom air-dried fiber glossy Scott Jones (27 Mar 2005)
- Tweaking linearization in QTR Stephen Veillette (27 Mar 2005)
- RE: QTR2 Ink Characterization (Curve creation) njfranknj (27 Mar 2005)
- Why not HP? pdcorlis (27 Mar 2005)
- Re: Re: Another UT7 problem/conversion to forum Diane Fields (27 Mar 2005)
- Best Book on B&W with Photoshop nedbuntline2002 (27 Mar 2005)
- QTR workflow with PhotoShop on Windows XP Charles Wilber (27 Mar 2005)
- (no subject) Drime (27 Mar 2005)
- Inspired by 1280 clogging thread; a year of pigment printing jim0266 (26 Mar 2005)
- aces: Epson, Forum, Yahoo, QTRgui. Djon (26 Mar 2005)
- New QTR user Edwin Nazarian (26 Mar 2005)
- Kirkland Glossy tone too Warm in QTR Martin Carrington (26 Mar 2005)
- QuadTone-ImagePrint-MIS inks mastedward (26 Mar 2005)
- Another UT7 problem neilsphoto (26 Mar 2005)
- Fog nsams2002 (26 Mar 2005)
- MIS inls, UT vs UT7 Andrei Aderca (26 Mar 2005)
- 13" wide roll paper for Epson 2200 xspamxken.schuster (26 Mar 2005)
- First UT7 prints neilsphoto (26 Mar 2005)
- Wow this new interface is pretty bad! So much for Streamlining! John Vitollo (26 Mar 2005)
- 13" wide roll paper for Epson 2200 Andrei Aderca (26 Mar 2005)
- Paul Roark: Alpha Natural White scott_now_coming (26 Mar 2005)
- Canon Canoscan 9950F scanner Andrei Aderca (26 Mar 2005)
- QTRgui Calibration Mode mastedward (26 Mar 2005)
- Premiere Art Hot Press Report. jimpegoda (26 Mar 2005)
- poor quality prints with EEM jimpegoda (26 Mar 2005)
- Oh look, they streamlined the forum... koloshor (25 Mar 2005)
- Epson 2200 & switching inks rbehr2001 (25 Mar 2005)
- RE: Epson 2200 & switching inks Paul Roark (25 Mar 2005)
- 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Bob Michaels (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Andrei Aderca (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Steve Kale (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Diane Fields (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Kelsang Drime (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Bob Michaels (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Diane Fields (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Steven Karafyllakis (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Drime (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Stephen Veillette (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Diane Fields (26 Mar 2005)
- RE: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Seth (27 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Andrei Aderca (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks bfwoolner (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks Diane Fields (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks John Vitollo (26 Mar 2005)
- Re: 1280 w Pigmnet clogs, was: Epson 2200 & switching inks bfwoolner (26 Mar 2005)
- new Nikon V, 2200, Ilford HP3, 1969 Djon (25 Mar 2005)
- QTR Ink Characterization (Curve creation) njfranknj (25 Mar 2005)
- Slightly OT - scanner/printer in Europe djmay6782 (25 Mar 2005)
- New quad inks from Media Street joelpickford (25 Mar 2005)
- OT -- Tucson, AZ Paul Roark (25 Mar 2005)
- Merlin by HawkMtn and QTR Andrew Unger (25 Mar 2005)
- Flakiness and drops on paper Stephen Veillette (25 Mar 2005)
- Carbon Ink Print permanence Andre (25 Mar 2005)
- photo papers Ann (25 Mar 2005)
- Can QTR do the following Ranjan (25 Mar 2005)
- Is there a B&W solution for these printers? Scott Jones (24 Mar 2005)
- EyeOne Usage for IJC linearization Ruhrfoto/Bernd L. (24 Mar 2005)
- PhotoShop CS Question David Neely (24 Mar 2005)
- New to your group with questions Ann (24 Mar 2005)
- Off topic R800 printer Stephen Kobrin (24 Mar 2005)
- Re: A Definitive B&W Pring;Dmax photoian@comcast.net (24 Mar 2005)
- Re:A Definitive B&W Printing; Dmax photoian@comcast.net (24 Mar 2005)
- Profile for C86 w/MIS EZ Inks mxgo95747 (24 Mar 2005)
- printer selection - newbie needs guidance Mark Stringer (24 Mar 2005)
- H. Photo Rag 460 in a 1280 jzall (24 Mar 2005)
- Duotones - Quadtones bwbonkers (24 Mar 2005)
- 2 Questions | Using MIS Cleaning Cartridges / Warranty Voiding Brian (24 Mar 2005)
- advantage QTR over QTRgui? Djon (23 Mar 2005)
- A Definitive B&W Pring; Dmax photoian@comcast.net (23 Mar 2005)
- 7600 UT7 curves Paul Roark (23 Mar 2005)
- Epson 4000 for B&W? welchmatt (23 Mar 2005)
- Quadtone RIP Faded print davidpichevin (22 Mar 2005)
- 1280 waste pad reset jim0266 (22 Mar 2005)
- What's best with scratch drives (was Re: Puzzled by PS scratch drives) Dean (22 Mar 2005)
- Puzzled by PS scratch drives Gary Barnett (22 Mar 2005)
- Banding with IJC/OPM but not Epson Driver (help!) selenium_toner (22 Mar 2005)
- Changing C84 EZN black cartridges 'on the fly' warrenk_j (21 Mar 2005)
- QTR Linearize with Epson 4870 Densitometer? hammerschmidtmark (21 Mar 2005)
- Only one ink working jgm818 (21 Mar 2005)
- QuadToneRIP 2.2b for Windows Update Roy Harrington (21 Mar 2005)
- How do you print custom paper sizes on a 2100/2200? yaakovsinclair (21 Mar 2005)
- How do you do borderless prints on a 2100/2200? yaakovsinclair (21 Mar 2005)
- A definitive BW print: Photoshop curves, IJC, other RIP or better printer? Mike Gerra (21 Mar 2005)
- Coating xspamxken.schuster (21 Mar 2005)
- Cobra skin pattern from scans nickmt (21 Mar 2005)
- C84 paper feed problem sandersm@aol.com (21 Mar 2005)
- Clayton Ultrasharp Jones PRO-1 Djon (21 Mar 2005)
- 2880 dpi with QTR mathewchristopher (20 Mar 2005)
- Is my cart defective? David Wroblewski (20 Mar 2005)
- need help with qtr, get banding accross all printed images mehrdad (20 Mar 2005)
- QTR Profile for Epson Premium Semigloss on 1290 juliuswiegele (20 Mar 2005)
- MIS UT7 cartridges photobrusher (20 Mar 2005)
- MIS Sponge-less-Carts For 2200 Tom Husband (19 Mar 2005)
- Coating - Nick Nugent James Haney (19 Mar 2005)
- IJC/OPM - seeking clarity James Haney (19 Mar 2005)
- Will this forum ever get streamlined? photobrusher (19 Mar 2005)
- New MIS UT7 cartridges? edrudolpho (19 Mar 2005)
- QTR linearization PC/Eye1 caelin2 (19 Mar 2005)
- 2200 (and1800): two questions p5198 (19 Mar 2005)
- OT..HELP!! Tim Timmermans (19 Mar 2005)
- Minolta Scan Elite 5400 II Robert (19 Mar 2005)
- Canon Pigment Printers scott_now_coming (19 Mar 2005)
- OT plug -- High Sierra Camp Paul Roark (19 Mar 2005)
- New competition on the printer market Bernie Ess (19 Mar 2005)
- MIS inks jgm818 (18 Mar 2005)
- QTR printing a line near edge of sheet frankg_photo (18 Mar 2005)
- Epson Watermarks Olaf Ringdahl (18 Mar 2005)
- MIS, same day e-mail response for help - great improvement Bob Michaels (18 Mar 2005)
- not printing right jgm818 (18 Mar 2005)
- Re: Digest Number 2962 Christer Rosewelll (18 Mar 2005)
- Re: Hey Christer-is that Your hand? Christer Rosewelll (18 Mar 2005)
- ink choice ganiyat (18 Mar 2005)
- New LCD monitor for color/photo professionals bdhainsw (18 Mar 2005)
- QTR selecting 2 tone curves help frankg_photo (18 Mar 2005)
- C86 VERTICAL! banding Steve Taylor (18 Mar 2005)
- new HPR bright white aaltenmueller (18 Mar 2005)
- Epson C86 & HPR 308 JensGerbitz (17 Mar 2005)
- Re: Digital vs. Film aderca@... (17 Mar 2005)
- Subject: Re: the contax toast/film thingy Jerry H (17 Mar 2005)
- Re: Shooting B&W digitally is doubly bizarre Christer Rosewelll (17 Mar 2005)
- Printers-Epson or Canon Graham (17 Mar 2005)
- Epson 4990, Microtek 1800f, Microtek i900 -- which for LF B+W negatives? sandersm@aol.com (17 Mar 2005)
- Epson R1800 Barbara Lee Spinnenweber (17 Mar 2005)
- Very Strange Banding Hans & Chia (17 Mar 2005)
- To Paul R, UT1 and 7500 Hans & Chia (17 Mar 2005)
- Calibrating a Monitor Andrew Unger (17 Mar 2005)
- Minolta 5400 film scanner vs Nikon V ED aderca@... (17 Mar 2005)
- Archiving digital -- it's not the media, it's the device Blaine Cavena (17 Mar 2005)
- EZ ink storage bob3c2000 (17 Mar 2005)
- Epson 4000, QuadTone Rip and Epson Premium Luster Paper furmanalejandro (17 Mar 2005)
- What about the folks in Asia? C83 instead of C86 joshuateong (17 Mar 2005)
- Contax is definitely not toast!!! Andre (17 Mar 2005)
- EZ ink storage bob3c2000 (17 Mar 2005)
- the contax toast/film thingy jnhugo (16 Mar 2005)
- Perhaps OT request re albums Ken Carney (16 Mar 2005)
- ink replacement jgm818 (16 Mar 2005)
- ink replacement jgm818 (16 Mar 2005)
- 16 bit greyscale / Ultrachrome / QTR john dean (16 Mar 2005)
- Epson 900P with UT2? johntunley (16 Mar 2005)
- peripheral vision - Timothy Atherton: Exhibition, Ottawa - April 3-27 Tim Atherton (15 Mar 2005)
- Unable to Scan btvarner (15 Mar 2005)
- platinum and palladium tones with Epson 9600 skinnerbox13@yahoo.com (15 Mar 2005)
- Contax is toast - whata shame Steve Kale (15 Mar 2005)
- Shades of Digital B&W Phil Rose (15 Mar 2005)
- Correcting exposure for Gray Gamma 1.8 Johnny Eades (15 Mar 2005)
- RE: Correcting exposure for Gray Gamma 1.8 Seth (16 Mar 2005)
- RE: Correcting exposure for Gray Gamma 1.8 William John Smith (17 Mar 2005)
- Correcting exposure for Gray Gamma 1.8 Johnny Eades (17 Mar 2005)
- Re: Re: Correcting exposure for Gray Gamma 1.8 Ernst Dinkla (18 Mar 2005)
- Re: Correcting exposure for Gray Gamma 1.8 Louis Dina (18 Mar 2005)
- Re: Re: Correcting exposure for Gray Gamma 1.8 Steve Kale (18 Mar 2005)
- Re: Correcting exposure for Gray Gamma 1.8 Louis Dina (18 Mar 2005)
- Re: Re: Correcting exposure for Gray Gamma 1.8 Ernst Dinkla (18 Mar 2005)
- Re: Re: Correcting exposure for Gray Gamma 1.8 Steve Kale (18 Mar 2005)
- Re: Re: Correcting exposure for Gray Gamma 1.8 Steve Kale (18 Mar 2005)
- Re: Correcting exposure for Gray Gamma 1.8 tariqgibranstudio (18 Mar 2005)
- Re: CRTs not being made, what LCD for future? Diane Fields (18 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Mark Savoia (18 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Diane Fields (18 Mar 2005)
- Re: CRTs not being made, what LCD for future? Djon (18 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Mark Savoia (18 Mar 2005)
- Re: CRTs not being made, what LCD for future? Djon (18 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Mark Savoia (18 Mar 2005)
- RE: Re: CRTs not being made, what LCD for future? Paul D. DeRocco (18 Mar 2005)
- Re: CRTs not being made, what LCD for future? Djon (18 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Diane Fields (18 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Anthony G. Atkielski (19 Mar 2005)
- Re: CRTs not being made, what LCD for future? johnglodge (18 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? El Estudio (18 Mar 2005)
- RE: Re: CRTs not being made, what LCD for future? Ken Carney (18 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Diane Fields (18 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Anthony S. Tubbs (18 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Anthony G. Atkielski (19 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Mark Savoia (19 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Bob Frost (19 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Steve Kale (19 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Anthony G. Atkielski (19 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Steve Kale (19 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Anthony G. Atkielski (19 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Steve Kale (20 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Anthony G. Atkielski (20 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Steve Kale (20 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Anthony S. Tubbs (20 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Steve Kale (20 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Anthony S. Tubbs (20 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Steve Kale (20 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? aderca@... (20 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Anthony S. Tubbs (20 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? aderca@... (20 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Diane Fields (20 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Tom Baker (19 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? dschiemann (19 Mar 2005)
- RE: Re: CRTs not being made, what LCD for future? Paul D. DeRocco (19 Mar 2005)
- Re: Re: CRTs not being made, what LCD for future? Anthony G. Atkielski (19 Mar 2005)
- Re: Re: Correcting exposure for Gray Gamma 1.8 Steve Kale (18 Mar 2005)
- Monitor Calibration - was Correcting exposure for Gray Gamma 1.8 Steve Kale (18 Mar 2005)
- Re: Monitor Calibration - was Correcting exposure for Gray Gamma 1.8 john dean (18 Mar 2005)
- Re: Monitor Calibration - was Correcting exposure for Gray Gamma 1.8 Steve Kale (18 Mar 2005)
- RE: Monitor Calibration - was Correcting exposure for Gray Gamma 1.8 Seth (18 Mar 2005)
- Re: Monitor Calibration - was Correcting exposure for Gray Gamma 1. Phil Rose (18 Mar 2005)
- Re: Monitor Calibration - was Correcting exposure for Gray Gamma 1. Steve Kale (18 Mar 2005)
- Re: Monitor Calibration - was Correcting exposure for Gray Gamma 1. Louis Dina (18 Mar 2005)
- Re: Monitor Calibration Steve Kale (18 Mar 2005)
- RE: Monitor Calibration Seth (19 Mar 2005)
- 7600, dmax & rips Paul Roark (15 Mar 2005)
- R1800 Paul Roark (15 Mar 2005)
- IJC Curve Design bwbonkers (15 Mar 2005)
- IJC/OPM Questions (vs. Epson Driver and Latest Proflies) selenium_toner (15 Mar 2005)
- Fwd: Re: my 1280 went belly up... Moises Faidengold (15 Mar 2005)
- Moab Kokopelli Photo Gloss Paper & Epson 2200 Owen P. Evans (15 Mar 2005)
- epson 1280 with glop, costco glossy paper,... thnaks much paul mehrdad (15 Mar 2005)
- John Dean, in response to your email to Nathan Baker. Walker Blackwell (14 Mar 2005)
- R800 marks HPR Richard Morton (14 Mar 2005)
- QTR roll on Mac Scott Graham (14 Mar 2005)
- roll paper size debacle Scott Graham (14 Mar 2005)
- UT7 printing, convert to grayscale? neilsphoto (14 Mar 2005)
- Link for MIS Easy Refill Cartridge for C86 Yang, Howard (14 Mar 2005)
- Print Exchange sign up correction Tom OConnell (14 Mar 2005)
- Mac: USB and Firewire together? Scott Graham (14 Mar 2005)
- What's the maximum Ram that CS can handle? yaakovsinclair (14 Mar 2005)
- How long should I wait before drymounting? yaakovsinclair (14 Mar 2005)
- VMS won't print sepia tone ingamom (14 Mar 2005)
- Photoshop Max RAM hi2ton (14 Mar 2005)
- QTR versus IJC/OPM steveh0607 (14 Mar 2005)
- help with panoramic prints on Epson 2200 bwdaly (13 Mar 2005)
- APRIL PRINT EXCHANGE SIGN UP OPEN Tom OConnell (13 Mar 2005)
- 1280 Sponge-less, EZ refill carts Paul Roark (13 Mar 2005)
- OT - MIS website/ordering oddies Michael Hung (13 Mar 2005)
- RIP Software Products Antonis (13 Mar 2005)
- IJC Curve design - Tonning. bwbonkers (13 Mar 2005)
- IJC/OPM or QTR with Qimage yah_group (13 Mar 2005)
- Permajet Monochrome Pro Steve Bell (13 Mar 2005)
- possibilities of a cheap printer; Lou Dina? p5198 (13 Mar 2005)
- my 1280 went belly up... Moises Faidengold (13 Mar 2005)
- 1280 Spongeless EZ-fill now in MIS webpage.. Michael Hung (12 Mar 2005)
- Karen M Glynn/Libraries/Provost/Academic/Univ/Duke is out of the office. Karen M Glynn (12 Mar 2005)
- VMS inkset ingamom (12 Mar 2005)
- UT Inks - long term color stability question Phil Morse (12 Mar 2005)
- Way off Topic BKPhoto@aol.com (12 Mar 2005)
- (unknown) photoian@comcast.net (12 Mar 2005)
- (unknown) photoian@comcast.net (12 Mar 2005)
- Re: QTR file count Diane Fields (11 Mar 2005)
- Scan resolution for printing 4x5 negs? pdcorlis (11 Mar 2005)
- (unknown) photoian@comcast.net (11 Mar 2005)
- Black Ink Only Kenneth Alden Smith (11 Mar 2005)
- Ilford update Tim Atherton (11 Mar 2005)
- Scanner & Scanning Software Question David Neely (11 Mar 2005)
- Strange happenings with the 4000 and the QuadtoneRIP Steve Schaefer (11 Mar 2005)
- 2200 walter schwartz (11 Mar 2005)
- Let's simplify nomenclature Djon (11 Mar 2005)
- What is actually in Ultrachrome inks? john dean (11 Mar 2005)
- Densitometer Question zonepeter (10 Mar 2005)
- Inovva papers Tyler Boley (10 Mar 2005)
- Re: But I won't tell... Christer Rosewelll (10 Mar 2005)
- Gretag-McBeth Eye One Design? Jack Winberg (10 Mar 2005)
- Re: Digest Number 2927 Christer Rosewelll (10 Mar 2005)
- C86 and MIS raymalin (10 Mar 2005)
- DMax and Glossy Prints - Are We Kidding Ourselves? Shilesh Jani (10 Mar 2005)
- NIK sharpener pro vs PK sharpener stevenksussman (10 Mar 2005)
- EZ-Refill for the 1160? NazarianEdwin@netscape.net (10 Mar 2005)
- Renaissance Wax and inkjet? Djon (10 Mar 2005)
- New paper danny (10 Mar 2005)
- limited editions steve208242 (10 Mar 2005)
- Printing on Vellum Jon Witsell (09 Mar 2005)
- Mysterious MIS "pigment" ink for Canon printers? John Broski (09 Mar 2005)
- Re: Epson models Graham (09 Mar 2005)
- 2200 Entrada question II Mr_Misty_44 (09 Mar 2005)
- Glop II Steve Kale (09 Mar 2005)
- OS X Profile for Condor BW paper spector_mike (09 Mar 2005)
- Generations QuadBlack inks Richard Wolfson (09 Mar 2005)
- 1280 EZ-REFILL CARTS ARE HERE! Steven Karafyllakis (09 Mar 2005)
- 2200 and Entrada question Mr_Misty_44 (09 Mar 2005)
- use FS curves for FSN? mojojones2001 (09 Mar 2005)
- QTR breakdown with espon 2100 hublaif (09 Mar 2005)
- different B&W Forum? Djon (09 Mar 2005)
- Any chance to see the Epson R800 supported by QTR ? nimrud2001 (09 Mar 2005)
- Re: Digest Number 2924 Jack Fulton (08 Mar 2005)
- Photokit sharpener and B&W aaashapiro (08 Mar 2005)
- black ink Paul Thacker (08 Mar 2005)
- 7600 maintenance Paul Roark (08 Mar 2005)
- Re:I don't know a justification for CS in real photography William Reeves Jr (08 Mar 2005)
- best way to ship a used 2200 printer Ronald Wu (08 Mar 2005)
- best way to ship a used 2200 printer Ronald Wu (08 Mar 2005)
- best way to ship a used 2200 printer Ronald Wu (08 Mar 2005)
- best way to ship a used 2200 printer Ronald Wu (08 Mar 2005)
- MIS CFS, any users? Jon Witsell (08 Mar 2005)
- Best RIP for Quadtone on 7500 sinarpro (08 Mar 2005)
- Piezotones on 4000? cschaible94111 (08 Mar 2005)
- unheard of d-max jimpegoda (08 Mar 2005)
- Unheard of D-Max! jimpegoda (08 Mar 2005)
- Microtek 120tf film scanner questions ben_zlotkin (08 Mar 2005)
- QTR Luster curves on the 4000? ffriedec (08 Mar 2005)
- UT2, 1280 problems Robert Krawiec (08 Mar 2005)
- Am I doing correctly? John (08 Mar 2005)
- My dumb thing to do Johnny Eades (07 Mar 2005)
- Bronzing photoian@comcast.net (07 Mar 2005)
- Curves for papers not listed for QTRIP 2.2a Donald Schiemann (07 Mar 2005)
- data recovery software Steve Schaefer (07 Mar 2005)
- QTR-Kayenta-Illum Alpha Smooth Not the Same Andrew Unger (07 Mar 2005)
- Epson printers: cartridge life William Real (07 Mar 2005)
- What is the correct head/capping gap distance on the Epson 7000??? john dean (07 Mar 2005)
- 8-bit, 16-bit : a demo Djon (07 Mar 2005)
- More on Epson's use of GLOP Bob Frost (07 Mar 2005)
- B&W on Ilford Smooth Pearl lindstromdick (07 Mar 2005)
- Ref QTR 2.2 hotmetal2004 (07 Mar 2005)
- paper flaking, buckling and blotchy burnishing jimpegoda (06 Mar 2005)
- Epson printers Graham (06 Mar 2005)
- Re: I don't know a justification for CS in real photography - Ron E Christer Rosewelll (06 Mar 2005)
- Phil Rose - QTR calibration and x-810 densitometer photoian@comcast.net (06 Mar 2005)
- color film for B&W? Scott Graham (06 Mar 2005)
- QTR profile install script not seeing printer mojojones2001 (06 Mar 2005)
- What is the correct head gap distance on the Epson 7000??? john dean (06 Mar 2005)
- QTR(Gui) bug - A3 paper, 720ppi ferdinand_paris (06 Mar 2005)
- 2200 ink limit Phil Rose (06 Mar 2005)
- QTR - Adding UT curves? guy washburn (06 Mar 2005)
- QTR now working have questions though nimages_67 (06 Mar 2005)
- R1800 & R800 NOT for B&W Out of the Box...? Tony Bonanno (05 Mar 2005)
- Qtr nickmt (05 Mar 2005)
- Naming these things revived Olaf Ringdahl (05 Mar 2005)
- Re: I don't know a justification for CS in real photography Christer Rosewelll (05 Mar 2005)
- ? B&W Monitor profiling/softproofing and BO workflow Kelsang Drime (05 Mar 2005)
- "Could not start ImageToRaster" Donald Schiemann (05 Mar 2005)
- Ott Light Kelsang Drime (05 Mar 2005)
- Is my Epson 1280 fit for CIS? Thomas Keesling (05 Mar 2005)
- Seth...Ott light Djon (05 Mar 2005)
- QTR link nimages_67 (05 Mar 2005)
- QuadToneRIP 2.2.0 Donald Schiemann (05 Mar 2005)
- Gray Lab working space question rm9789 (05 Mar 2005)
- Naming these things revived Olaf Ringdahl (04 Mar 2005)
- Qtr error message dsmall9917@aol.com (04 Mar 2005)
- QTR/toner curves/allow split-tone only? Nick H. Nugent (04 Mar 2005)
- Ott light Djon (04 Mar 2005)
- is there any advantage to 1280 vs 2200? Djon (04 Mar 2005)
- Soft proofing photoian@comcast.net (04 Mar 2005)
- Re: Caonigro 8-bit, 16-bit normsams (04 Mar 2005)
- Re: Caonigro 8-bit, 16-bit Djon (05 Mar 2005)
- Re: Re: Caonigro 8-bit, 16-bit guy washburn (05 Mar 2005)
- Re: Re: Caonigro 8-bit, 16-bit Diane Fields (05 Mar 2005)
- Re: Caonigro 8-bit, 16-bit Djon (05 Mar 2005)
- Re: Caponigro 8-bit, 16-bit Tom Andrews (05 Mar 2005)
- Re: Re: Caponigro 8-bit, 16-bit Peter Gorwin (05 Mar 2005)
- RE: Re: Caponigro 8-bit, 16-bit Seth (07 Mar 2005)
- Re: Re: Caponigro 8-bit, 16-bit Carolyn Frayn (05 Mar 2005)
- Re: Caonigro 8-bit, 16-bit Tyler Boley (05 Mar 2005)
- Re: Caonigro 8-bit, 16-bit Tom Andrews (06 Mar 2005)
- Re: Caonigro 8-bit, 16-bit john dean (06 Mar 2005)
- Re: Caonigro 8-bit, 16-bit Tyler Boley (06 Mar 2005)
- Re: Re: Caonigro 8-bit, 16-bit Dan Koons (05 Mar 2005)
- Re: QTR surprises.... Diane Fields (05 Mar 2005)
- Re: Caonigro 8-bit, 16-bit mojojones2001 (06 Mar 2005)
- Re: Caonigro 8-bit, 16-bit mojojones2001 (06 Mar 2005)
- Caponigro 8-bit, 16-bit normsams (04 Mar 2005)
- PKN and color printing ccolbertbw (04 Mar 2005)
- Following Roark's Media Settings: Deep Blacks Look 'Posterized' rvburget (04 Mar 2005)
- HP 8750? jt_wall@... (04 Mar 2005)
- Problem installing Epson 2100 and 1270 on one system brtjaspers (04 Mar 2005)
- Selling MIS UF-FS inks & Piezograpy Selenium (1160 860 1520 carts) Arthur Fink (04 Mar 2005)
- BO - with my 1280 it doesn't work optimally toniko74 (04 Mar 2005)
- Is my Epson 1280 fit for CIS? toniko74 (04 Mar 2005)
- Exhibition for Pacific Northwest Photographers jimpegoda (04 Mar 2005)
- Lascaux fixative jimpegoda (03 Mar 2005)
- gray lab zip for QTR Diane Fields (03 Mar 2005)
- R800 Scott Jones (03 Mar 2005)
- New UT-2 Magenta formulation? Thomas Keesling (03 Mar 2005)
- Seeking a "quickstart guide/opinion" to quality BW printing Mike (03 Mar 2005)
- Naming these things revived Olaf Ringdahl (03 Mar 2005)
- Printing stopped in QTR Diane Fields (03 Mar 2005)
- qtr - eye1 linearization question sanfo2003 (03 Mar 2005)
- new c86 jcarlisle98 (03 Mar 2005)
- MIS support jnhugo (03 Mar 2005)
- which is whiter? alnchiem (03 Mar 2005)
- QTR Newbie report Daniel Ridings (03 Mar 2005)
- BO Printing Epson 1290s tcooote (03 Mar 2005)
- Workshops Jack Winberg (02 Mar 2005)
- Re: hinge mounting (to Clayton) mojojones2001 (02 Mar 2005)
- New UT-2 Magenta formulation? Thomas Keesling (02 Mar 2005)
- Workshops Jack Winberg (02 Mar 2005)
- Arches Infinity Natural Inkjet Paper-Another Question ritab19106@aol.com (02 Mar 2005)
- QTR Calibration photoian@comcast.net (02 Mar 2005)
- Ink out override? Cross posted Mark Savoia (02 Mar 2005)
- Any workshops offered? glemasurier (02 Mar 2005)
- MIS 7600 Archival ink and 2200 Mr_Misty_44 (02 Mar 2005)
- Qtrrrrrrr nickmt (02 Mar 2005)
- Qtr etc nickmt (02 Mar 2005)
- UT2 inks...Photo or Eboni Chris (02 Mar 2005)
- QTR calibration - Ink separation question aimforth (02 Mar 2005)
- 2200, UT7 & Glop Paul Roark (01 Mar 2005)
- Re: Digest Number 2905 Bart Nadeau (01 Mar 2005)
- channel mixing jgm818 (01 Mar 2005)
- naming these things revived jimpegoda (01 Mar 2005)
- Re: scratch removal program Historic Photo Archive (01 Mar 2005)
- B&W Conversion Plug-ins Kelsang Drime (01 Mar 2005)
- Roll paper cut into sheets for qtr john dean (01 Mar 2005)
- Hewlett Packard and B&W? pdcorlis (01 Mar 2005)
- BO Printing - not possible on Epson 2100! hammerschmidtmark (01 Mar 2005)
- Kirkland Costco Paper maggieradlick (01 Mar 2005)
- LINEARIZING BLACK & WHITE rjtthomaselli (01 Mar 2005)
- to paul roark your dl on your homepage dont work for me freduardook2000 (01 Mar 2005)
- Re: Digest Number 2903 Bart Nadeau (01 Mar 2005)
- 9600 QTR and Roll applications?? john dean (01 Mar 2005)
- MIS supply customer service. ben_zlotkin (01 Mar 2005)
- Epson premium semimatte (and QTR) Pieris Berreitter (01 Mar 2005)
- Re: Chemist Mark Rabiner (01 Mar 2005)
- Re: signing Clayton Jones (01 Mar 2005)
- Re: B/W Film scanning dust removal software?? Daniel Ridings (01 Mar 2005)
- Re: B/W Film scanning dust removal software?? AWStolzing@aol.com (01 Mar 2005)
- RE: B/W Film scanning dust removal software?? Richard (01 Mar 2005)
- Re: B/W Film scanning dust removal software?? esasinkkonen (01 Mar 2005)
- Re: B/W Film scanning dust removal software?? Mark Savoia (01 Mar 2005)
- RE: B/W Film scanning dust removal software?? Ken Carney (01 Mar 2005)
- Re: Arches Infinity Natural Inkjet Paper ritab19106@aol.com (02 Mar 2005)
- Re: Re: QTR still no spool nickmt (01 Mar 2005)
- Re: Re: QTR still no spool nickmt (01 Mar 2005)
- Re: Re: QTR still no spool nickmt (01 Mar 2005)
- Re: Re: hinge mounting Steve Kale (01 Mar 2005)
- Re: hinge mounting mojojones2001 (28 Feb 2005)
- RE: Re:signing Seth (01 Mar 2005)
- 2 or 3 grays/greys? (was Epson R1800 vs 2200..need opinion fast) rikeller (01 Mar 2005)
- Re: Re: Epson R1800 vs 2200..need opinion fast Ernst Dinkla (23 Feb 2005)
- RE: Vuescan, PWP, PS-CS, Qimage and QTR ICC profiles Seth (01 Mar 2005)
- Re: Vuescan, PWP, PS-CS, Qimage and QTR ICC profiles Ernst Dinkla (04 Mar 2005)
- Re: New 16"x20" HP printer Bernie Ess (15 Mar 2005)
- Re: GLOP for matte prints? Daniel Staver (15 Mar 2005)
